Boasting an innovative new design, this clever stop operates with the power of rare earth magnets, with a concealed pin in the floor catching the strike plate as the door passes over it, bringing the door to a halt right where you want it to. The streamlined design is clean and understated, and will not pose a trip hazard due to its flush installation.
Please note that bottom mounts are not compatible with T-guide or floor channel. Side (face) mounts are not compatible with either the C-guide or Stay Rollers (both wall and floor mounted). The clearance that is required for mounting the fantom stop to the bottom of the door is a minimum of 15mm (1/2"). It is recommended not to exceed 15mm (1/2"), if the clearance exceeds 15mm (1/2") a shim should be placed to reduce the gap. The required minimum door thickness for mounting the fantom stop to the bottom of the door is 35mm (1-3/8").
Fantom Stop also offers an optional installation kit which includes a: 24mm Spade Bit, 14mm Spade Bit, 14mm Masonry Bit, 2.5mm Timber Bit, a Clean-out Brush and a Phillips Head Bit. The installation kit does offer everything you need to mount your fantom stop to the desired door. Please note silicon glue will be needed to adhere the sleeve that houses the magnetic pin to the hole you will drill in the floor, which is not included in the installation kit.